Biomechanics:
Kinetics/Force/Torque/Power/Work/Joint Moments/Pressure |
Transference of 3D
accelerations during cross country mountain biking, 2014 |
Joint-Specific
Power-Pedaling Rate Relationships During Maximal Cycling, 2014 |
Mechanical work accounts
for sex differences in fatigue during repeated sprints. 2012 |
Effects of locomotor
muscle fatigue on joint-specific power production during cycling. 2012 |
Influence of road
incline and body position on power-cadence relationship in endurance cycling
2012 |
Power-cadence
relationship in endurance cycling. 2012 |
Biomechanics
and energetics of uphill cycling: a review. 2012 |
Evolution of
pedalling biomechanics during a Wingate test for different cyclist types: a
preliminary study. 2012 |
Changes of
whole-body power, muscle function, and jump performance with prolonged
cycling to exhaustion. 2012 |
Effect of crank
length on joint-specific power during maximal cycling. 2011 |
Effects of bicycle
saddle height on knee injury risk and cycling performance. 2011 |
Effectiveness of
force production in persons with unilateral transtibial amputation during
cycling. 2011 |
Diurnal variation in
Wingate-test performance and associated electromyographic parameters. 2011 |
Joint-specific power
production during submaximal and maximal cycling. 2011 |
The energetics of
cycling on Earth, Moon and Mars. 2011 |
Diurnal evolution of
cycling biomechanical parameters during a 60-s Wingate test. 2011 |
The effect of
cadence on timing of muscle activation and mechanical output in cycling: on
the activation dynamics hypothesis. 2011 |
Bioenergetics and
biomechanics of cycling: the role of 'internal work'. 2011 |
Warm-up affects
diurnal variation in power output. 2011 |
Less is more:
standard warm-up causes fatigue and less warm-up permits greater cycling
power output. 2011 |
The effect of saddle
position on maximal power output and moment generating capacity of lower limb
muscles during isokinetic cycling. 2011 |
Kinetics and
kinematics analysis of incremental cycling to exhaustion. 2010 |
Fatigue effects on
the coordinative pattern during cycling: kinetics and kinematics evaluation.
2010 |
Effects of saddle
height, pedaling cadence, and workload on joint kinetics and kinematics
during cycling. 2010 |
Interpretation
of crank torque during an all-out cycling exercise at high pedal rate. 2010 |
Force-velocity
relationship in cycling revisited: benefit of two-dimensional pedal forces
analysis. 2010 |
Joint-specific power
absorption during eccentric cycling. 2010 |
Joint-specific power
loss after eccentric exercise. 2010 |
Direct measurement
of power during one single sprint on treadmill. 2010 |
Static and cyclic
stretching: their different effects on the passive torque-angle curve. 2010 |
Influence of
length-restricted strength training on athlete's power-load curves of knee
extensors and flexors. 2010 |
Muscle coordination
is key to the power output and mechanical efficiency of limb movements. 2010 |
Effects of workload
on seat pressure while cycling with two different saddles. 2009 |
Whole-body
efficiency is negatively correlated with minimum torque per duty cycle in
trained cyclists. 2009 |
Muscular and
non-muscular contributions to maximum power cycling in children and adults:
implications for developmental motor control. 2009 |
Joint-specific power
production and fatigue during maximal cycling. 2009 |
The effect of
pedaling cadence and power output on mechanomyographic amplitude and mean
power frequency during submaximal cycle ergometry. 2008 |
Interindividual
variability of electromyographic patterns and pedal force profiles in trained
cyclists. 2008 |
Effect of a novel
pedal design on maximal power output and mechanical efficiency in
well-trained cyclists. 2008 |
Cycling on rollers:
Kreitler fan resistance at submaximal levels of effort. 2008 |
Cadence and workload
effects on pedaling technique of well-trained cyclists. 2008 |
Effective force and
economy of triathletes and cyclists. 2007 |
Power output
measurement during treadmill cycling. 2007 |
Understanding
sprint-cycling performance: the integration of muscle power, resistance, and
modeling. 2007 |
Influence of
cadence, power output and hypoxia on the joint moment distribution during
cycling. 2007 |
Development and
evaluation of a new bicycle instrument for measurements of pedal forces and
power output in cycling. 2007 |
Development and
calibration of a pedal with force and moment sensors. 2006 |
Effects of static
stretching on leg power during cycling. 2006 |
Non-driving
intersegmental knee moments in cycling computed using a model that includes
three-dimensional kinematics of the shank/foot and the effect of simplifying
assumptions. 2003 |
Biomechanical
determinants of pedaling energetics: internal and external work are not
independent. 2002 |
Pedal trajectory
alters maximal single-leg cycling power. 2002 |
Influence of hip
orientation on Wingate power output and cycling technique. 2002 |
The generalized
torque approach for analyzing the results of pedaling tests. 2001 |
The validity of
power output recorded during exercise performance tests using a Kingcycle
air-braked cycle ergometer when compared with an SRM powermeter. 2000 |
Characteristics of
the force applied to a pedal during human pushing efforts: emergent
linearity. 2000 |
Is a joint
moment-based cost function associated with preferred cycling cadence? 2000 |
Inertial effects on
mechanically braked Wingate power calculations. 2000 |
The influence of
cadence and power output on force application and in-shoe pressure
distribution during cycling by competitive and recreational cyclists. 2000 |
The effect of pedal
crank arm length on joint angle and power production in upright cycle
ergometry. 2000 |
Lower
extremity joint moments during uphill cycling. 1999 |
Simplified
deceleration method for assessment of resistive forces in cycling. 1999 |
Comparison of
treadmill and cycle ergometer measurements of force-velocity relationships
and power output. 1999 |
The association
between negative muscle work and pedaling rate. 1999 |
Ratings of perceived
exertion (RPE) during cycling exercises at constant power output. 1998 |
Standard mechanical
energy analyses do not correlate with muscle work in cycling. 1998 |
Neuromuscular,
metabolic, and kinetic adaptations for skilled pedaling performance in
cyclists. 1998 |
The effect of
intersegmental knee moments on patellofemoral contact mechanics in cycling.
1998 |
Torque-velocity
relationship during cycle ergometer sprints with and without toe clips. 1997 |
Effect of cycling
experience, aerobic power, and power output on preferred and most economical
cycling cadences. 1997 |
Inertial-load method
determines maximal cycling power in a single exercise bout. 1997 |
A model for
optimizing cycling performance by varying power on hills and in wind. 1997 |
The relationship
between maximal power and maximal torque-velocity using an electronic
ergometer. 1996 |
A state-space
analysis of mechanical energy generation, absorption, and transfer during
pedaling. 1996 |
Work and power
outputs determined from pedalling and flywheel friction forces during brief
maximal exertion on a cycle ergometer. 1996 |
Use of the
force-velocity test to determine the optimal braking force for a sprint
exercise on a friction-loaded cycle ergometer. 1996 |
Maximal muscle power
output in cycling: a modelling approach. 1996 |
Isokinetic cycle
ergometer--application in sports medicine. 1995 |
In-shoe
pressure distributions for cycling with two types of footwear at different
mechanical loads. 1995 |
A comparison of
muscular mechanical energy expenditure and internal work in cycling. 1994 |
Response of
intersegmental knee loads to foot/pedal platform degrees of freedom in
cycling. 1993 |
Three-dimensional
knee joint loading during seated cycling. 1992 |
The effect of
lower-limb anatomy on knee loads during seated cycling. 1992 |
Effect of fatigue on
maximal power output at different contraction velocities in humans. 1991 |
Physiological and
biomechanical factors associated with elite endurance cycling performance.
1991 |
The biomechanics of
cycling. 1991 |
An angular velocity profile in cycling
derived from mechanical energy analysis. 1991 |
Lower extremity
cycling biomechanics. A review and theoretical discussion. 1991 |
The influence of
cadence and power output on the biomechanics of force application during
steady-rate cycling in competitive and recreational cyclists. 1991 |
Cycling
biomechanics: a literature review. 1991 |
Biomechanics of
cycling and factors affecting performance. 1990 |
Power equations in
endurance sports. 1990 |
Optimal design
parameters of the bicycle-rider system for maximal muscle power output. 1990 |
Multivariable
optimization of cycling biomechanics. 1989 |
Mechanical muscular
power output and work during ergometer cycling at different work loads and
speeds. 1988 |
Cycle power: a
predictive model. 1988 |
Patellofemoral joint
forces during ergometric cycling. 1987 |
Achilles tendon
forces during cycling. 1987 |
Comparison of
physiology and biomechanics of speed skating with cycling and with skateboard
exercise. 1987 |
On the biomechanics
of cycling. A study of joint and muscle load during exercise on the bicycle
ergometer. 1986 |
Load moments about
the hip and knee joints during ergometer cycling. 1986 |
Tibiofemoral joint
forces during ergometer cycling. 1986 |
On the relation
between joint moments and pedalling rates at constant power in bicycling.
1986 |
The forces of ankle
joint structures during ergometer cycling. 1985 |
Knee flexor moments
during propulsion in cycling--a creative solution to Lombard's Paradox. 1985 |
The relationship
between mechanical and physiological energy estimates. 1985 |
Varus and valgus loads on the
knee joint during ergometer cycling. 1984 |
Power output and
fatigue of human muscle in maximal cycling exercise. 1983 |
[Bicycling. Articular movements,
electromyography and forces]. 1983 |
Forces applied to a
bicycle during normal cycling. 1979 |
The measurement of leg
forces exerted in bicycling by patients with functionally asymmetrical limbs
[proceedings]. 1976 |